How to reset the Skydio Enterprise Controller

Published: Updated:

  1. Skydio
  2. Controlling Devices
  3. Skydio Enterprise Controller

If your Skydio Enterprise Controller is in an unresponsive or other off-nominal state, you may need to perform a hard reset. This will power off the controller and allow you to reboot.

To reset your Controller:

Step 1 - Simultaneously press and hold the C1, Home, Launch, and Pause buttons for 45 seconds.

 

If that does not work, go to Step 2

controller_open_4_button_reset.png

Step 2 - Press the hard reset button

There are two versions of the Skydio Enterprise Controller. To tell the difference, check the Model number located on the back.

If your controller model number ends in SBR or S, this is the Skydio Enterprise Controller-S. The reset button is located on the front of the controller. 

If your controller model number ends in a BR or does not have any letters following the model number, this is the Skydio Enterprise Controller. The reset button is located on the top of the controller.

Enterprise Controller-S

controller_open_new_anno.png

Skydio Enterprise Controller

CS_C78_media_illo_controller-reset.png

Step 3 - Select Power Off or Restart

The controller will restart or power off, allowing you to power it back on again

  

 

 Skydio, Inc. A0338

Was this article helpful?