Overview

Skydio X2E is designed to be lightweight, and foldable so that dismantling for storage and transport is quick and simple.

Quick Steps

warning.png

The propeller blades are sharp, handle with care.

 

Step 1  - Power off  X2E and Skydio Enterprise Controller

 

Step 2 - Gently push each antenna down and in

    • guide them into the locked position
R21-UG-assembly-X2-4-1.jpg
Step 3 - Slide the battery away from the camera until the magnets disengage battery_off_arms_extended_X2.png
Step 4 - Release the 4 arm clamps clamps_arms_extended_X2.png

Step 5 - Lift motor arms in and towards the body

    • until they hit the hard stop guide
battery2.png

Step 6 - Return arm clamps to the locked position

    • ensuring that the blue marks align
arm_clamp_circle.png

 

Explore More

How to activate your Skydio Enterprise Controller

 

If you have questions or need additional support—feel free to reach out! Skydio Support

 

 

 © 2021 Skydio, Inc. All rights reserved A0025

Was this article helpful?