Skydio X10: v34.1.112 - 11 June 2024
Published: Updated:
| Skydio X10 software version | 34.1.112 |
| Skydio X10 Controller version | 34.1.79 |
Updated Skydio X10 Overheating Alerts and Behavior
- Improves the drone overheating alert model
- Better accuracy and cadence of drone overheating alerts with updated user guidance
- Disables obstacle avoidance at high temperatures to reduce power draw and lower drone temperature
- If the drone temperature drops back down during flight, obstacle avoidance will be re-enabled
[note] Temperature alerts are based on internal drone components that are significantly higher than ambient temps. [/note]
|
Previous (v31.4.106 and older) Single alert when drone reaches critical temperatures |
Alert 1 - Land Now Take immediate action to land |
|
New (v34.1.112) Series of three alerts, first alert is now triggered a little later than the previous single alert |
|
|
Alert 1 - Drone is Heating Up Can be dismissed; recommended to disable obstacle avoidance. Triggered a little bit later than the previous single alert |
|
|
Alert 2 - OA disabled Note that obstacle avoidance may re-enable if the drone temperature drops back down during flight |
|
|
Alert 3 - Land Now |
|
X10 Battery Tuning
- Tuning for X10 battery charging and gauging
Was this article helpful?