The information collected on this page is meant to help Skydio users fly safely and responsibly. Below you'll find best practices, links to additional content, and regulatory information to enhance safety as well as your overall experience with your drone.

To get the most out of your Skydio 2 and any Skydio accessories, please read all of the information below before your first flight. Failure to follow these safety instructions could result in injury or damage to you, your Skydio product, or other persons or property. Additionally, not following these safety instructions could result in damaging your Skydio product in a way that renders it ineligible for warranty coverage. Complete details of the Skydio warranty program are available at skydio.com/legal/warranty.

Please note that the content on this page is not a substitute for your judgment and common sense when flying your Skydio drone. You are solely responsible for assuring your Skydio flights are managed safely and in accordance with all local and federal laws and regulations.

Best Practices

Skydio_2_Safety_Tips.png

Before You Fly

  • Because Skydio 2 navigates visually, it is essential to keep all of its cameras clean. Use the included cleaning cloth (or any clean microfiber cloth) to ensure cameras are free of dust and dirt before every flight.
  • Skydio 2 uses magnets to retain the battery which may attract metallic debris that could compromise the safe fitment of the battery. Prior to installing any battery, visually inspect the bottom of the Skydio 2 and top of the battery, including connectors, to ensure they are free of objects, debris or damage. Verify the battery is fully seated in the aircraft prior to takeoff. Do not fly with any batteries with enclosures that are cracked, gouged, dented or otherwise substantially physically deformed. Safely dispose of any damaged batteries.
  • If using a mobile device running the Skydio 2 app, ensure any Battery Saver or Low Power modes are disabled. These modes may interfere with Skydio 2’s ability to communicate with the device and negatively impact your flight experience.
  • Remove the gimbal retaining clip from the front-facing camera.
  • Ensure all propellers are firmly attached and free of nicks, cracks, or other visible damage. Never fly with damaged propellers.

Where to Fly

  • You are responsible for your Skydio 2 at all times. Always follow FAA guidelines for UAS piloting. Check resources like knowbeforeyoufly.org or apps like B4UFLY for more information.
  • Skydio 2 can only fly in normal daytime conditions. Since it navigates visually, it won’t work at night or in other low-light situations.
  • Skydio 2 is not weatherproof and requires good visibility. Do not fly in any precipitation, including rain, fog, or snow.
  • Skydio 2 should not be flown when winds or gusts are above 25 mph.
  • Do not fly in temperatures below 23° F (-5C) or above 104° F (40C).
  • See this article for more tips and information on where to fly your Skydio drone.

Flying Safe

  • Your Skydio drone only avoids obstacles that are not in motion. Cars, boats, balls, animals, other drones, other people, or similar moving objects may not be avoided if they’re moving. You should exercise extreme caution and good judgment when flying with other people around. If you know that you’ll be around others in motion, we suggest you leave the Height Floor setting enabled to ensure Skydio 2 maintains a safe elevation.
  • Keep your fingers away from the propellers anytime they’re spinning such as during launch, flight, and landing. When landing, Skydio 2 descends straight down and does not avoid obstacles. Ensure your landing area is flat and clear of obstacles.
  • Do not intentionally try to crash Skydio 2.
  • When following a car or other vehicle, follow while off-road or on a closed course. Never use Skydio 2 over public roadways.
  • The Skydio 2’s metal frame may become hot to the touch in high-temperature environments or direct sunlight, even if powered off. The metal frame may also become hot if powered on while on the ground for long periods of time.
  • Do not fly over bodies of water more than 30 ft. across if Skydio 2 indicates a GPS quality warning.
  • Skydio 2 can’t see certain visually challenging obstacles. Do not fly around thin branches, telephone or power lines, ropes, netting, wires, chain link fencing or other objects less than ½ inch in diameter.
  • Do not fly around transparent surfaces like windows or reflective surfaces like mirrors greater than 60cm wide.
  • If your Skydio 2 does hit an obstacle it can’t see, it will do its best to stabilize itself and continue the flight.
  • When the sun is low on the horizon, it can temporarily blind Skydio 2’s cameras depending on the angle of flight. Your drone may be cautious or jerky when flying directly toward the sun.
  • Your Skydio 2 can fly up to 36 mph under most conditions.
  • If your Skydio 2 can’t see you, it may stop following you temporarily. It will wait until it reacquires you visually or use your Beacon’s GPS to find you (if using a Skydio Beacon).
  • Skydio 2 may instruct you to land if it encounters an error or determines the environment is not safe for flying. When instructed to do so, immediately fly Skydio 2 to the safest area nearby and land.
  • Flying at high altitudes may significantly increase the time required to return and safely land the Skydio 2. The pilot is responsible for managing the vehicle’s altitude, range and battery level at all times.
  • Be sure to watch the flight tutorials in the app and pay attention to any in-app messages.

Safety-Related Articles

For more detailed information, please read the following:

The Skydio 2 Safety and Operating Guide is available here as a PDF.

The R1 Safety and Operating Guide is available here as a PDF

Regulatory

Proposition 65 Warning:

This product contains chemical(s) known to the State of California to cause cancer and birth defects or other reproductive harm.

These devices comply with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. These devices may not cause harmful interference, and
  2. These devices must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Skydio could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult help@skydio.com or an experienced radio/TV technician for help.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Your use of this product is subject to the Terms of Use, available at skydio.com/legal/terms.