How to use Range Limits Geofence on Skydio X10D

Setting Range Limits allows for precise control over mission boundaries, improves safety, and satisfies key regulatory requirements. Pilots define a maximum range (164 to 32,808 ft / 50 to 10,000 m) that the drone can fly from the controller using a slider. 

• When the drone reaches the limit, it will stop and hover.
• The geofence is centered on the controller’s GPS position and moves with the pilot while the controller's GPS is valid.
• If the controller GPS is lost during flight, the geofence center point freezes at the last valid controller location.
• If the controller has never provided a valid GPS, the center point defaults to the launch location.

Step 1 - Select Global Settings Menu > Flight Controls

Step 2 - Select Limits > Toggle on/off

Step 3 - Set the maximum range from 164 to 32,808 feet

Explore More

Explore related articles for additional information

Skydio X10D Manuals, Guides, and Resources

Understanding telemetry on Skydio X10D

Understanding Skydio X10 contingency behaviors

[note]If you need assistance, please reach out to: FedSupport@skydio.us[/note]

Skydio, Inc. A0607