How To Create a Skydio Paraverse Flight Simulator
Published: Updated:
Overview
Skydio Paraverse is a feature-rich virtual environment that mirrors Skydio’s software suite. Organization administrators can use Paraverse to test system configurations, payload attachments, and integrations with third-party services. Remote Pilots can configure missions and safely practice flight system features using virtual Skydio drones and 3D maps. Paraverse drones can be flown from Remote Flight Deck or with a Skydio Controller.
How It Works
Paraverse runs the vast majority of the same production software used by Skydio vehicles—including perception, planning, and control——and connects that experience to Skydio Cloud. The simulated vehicle flies through an interactive 3D environment and behaves like a Cloud-connected Skydio drone, so teams can exercise most major vehicle and Cloud workflows without deploying physical hardware.
[note]Contact the Skydio Account team or Skydio Support to start a Paraverse trial and receive a dedicated organization. Keep simulated vehicles and docks in that organization, separate from the production fleet.[/note]
Capabilities
- Remote flight operations: Launch and manually pilot a simulated aircraft through Remote Flight Deck or supported controller workflows.
- Obstacle Avoidance and autonomous navigation: Experience how the vehicle perceives its surroundings and navigates around obstacles.
- Pathfinder and Fly-to-Point: Select a destination and allow Pathfinder to plan and execute an autonomous route.
- Sites and geofences: Configure operational boundaries, keep-in and keep-out areas, height constraints, and safe landing locations.
- Waypoint missions: Create, save, and execute pre-planned routes without manually piloting the vehicle.
- Dock operations: Practice launch, dispatch, return-to-dock, and autonomous landing workflows.
- Media sync and telemetry: Generate simulated flight data and media and sync them to Skydio Cloud according to the organization’s configuration.
- Cloud integrations: Exercise supported Cloud, API, marker, and partner-integration workflows using a simulated, Cloud-connected vehicle.
- Multi-drone operations: Where enabled, launch, monitor, and coordinate multiple simulated vehicles from the same Cloud environment.
How To Create a Paraverse Flight Simulator
After the Paraverse organization is created, create a new Paraverse to start flying:
- Log into Skydio Cloud.
- Click/Press the dropdown above the Fleet or Home tab in navigation and select the dedicated Paraverse organization.
-
Select Create Paraverse from either:
- The Fleet view, or
- Settings > Devices
[note]Click the dropdown to create the Paraverse in preset modes:
- Arcade mode: Launch a competitive arcade level
- Training Scenario: Practice with a realistic, guided Training Scenario.
[/note]
-
Configure the Paraverse:
- Paraverse Type: Select Single Drone or Multiple Drones. Up to six drones can be flown in a single Paraverse.
- Name: Name the simulator. The name must be unique.
-
Map: Click the dropdown to select a map.
- San Francisco: Approximately 40 km² 3D model from Twin Peaks to Oracle Park (Giants Stadium). Useful for experiencing how varying ground elevation affects autonomy.
- New York City: Approximately 30 km² 3D model around Central Park. Useful for high-density urban flight, especially navigating around tall buildings.
- Fly Anywhere: Place the Paraverse anywhere on Earth.
- Select a Site. Add the Paraverse to an existing Site from the dropdown, or create a new Site. In both cases, the system runs dock Setup Flight configuration automatically. If a site is not needed, select No Site.
- Place the Paraverse on the map. Click any point on the map to place the vehicle (and dock, if any), or enter GPS coordinates and heading in the fields below the map.
- Set the Paraverse expiration. This value determines how long until the Paraverse automatically shuts down. The default is 3 hours. A Paraverse that remains on consumes simulator hours even when it is not being flown.
[note]Click View Settings to check remaining simulator hours for the month.[/note]
- (Optional) Click the Advanced Options check box to configure additional settings for this Paraverse.
- Select Create at the bottom left of the menu.
After creation, the Paraverse drone appears in the Fleet view. Select it to view status and fly. Creation usually takes about five minutes, though wait times can be longer depending on available resources. The UI shows creation progress through each stage until the vehicle is ready to fly.
Configure Advanced Settings
Admins and remote pilots can specify additional settings when creating a new Paraverse:
- Drone configuration: Select the vehicle configuration. Only X10/Dock for X10 is officially supported in Paraverse at this time; additional platforms such as R10 and F10 are planned.
- Software version: Run the Paraverse on a specific software release. Skydio recommends using the latest official release available for the platform.
- Gimbal & Attachments: Choose the gimbal and add attachments. Attachments expose the related UI for configuration and use, but they do not produce visual effects in the simulated world.
-
Battery: Set the initial battery level (default 100%) and choose a Battery Sim Mode:
- Infinite — state of charge does not affect the flight experience
- Linear — battery discharges linearly over time
- Realistic — closer to real Skydio battery behavior
- Additional options: Configure options such as Remote ID exemption or enabling dynamic objects.
Dynamic Objects in Paraverse
Dynamic objects add moving activity to a Paraverse environment. Depending on the selected environment and configuration, agents can include cars, pedestrians, and aircraft.
Unlike static scenery, dynamic agents move through the simulated world. Cars can travel along roads, pedestrians can move through outdoor areas, and aircraft can add activity to the surrounding airspace. This makes free flight, demonstrations, and training exercises feel more representative of an active operational environment.
Example Workflows
Remote pilots can use dynamic objects to experience workflows such as:
- Search and identification: Locate a person or vehicle matching a description
- Moving-subject observation: Follow a car or pedestrian while maintaining an effective camera position
- Shadow: Practice initiating and monitoring tracking on a moving subject
- Aerial overwatch: Maintain awareness of vehicles and people moving through an incident area
- Traffic awareness: Practice maintaining awareness of other activity while completing a mission
Enable Dynamic Objects in Paraverse
Enable dynamic objects when creating a new Paraverse simulator (Create Paraverse > Additional Options > Enable dynamic objects).
Training Scenarios may also create specific agents and control their movement as part of the scenario narrative.
[note]Training Scenarios are currently in Early Access with select organizations. Contact a Skydio representative to find out when Training Scenarios will become available for general access.[/note]
[note]Dynamic agents are simplified representations intended for training and demonstration. Their appearance, movement, and behavior may not perfectly reproduce real people, vehicles, or aircraft. Simulated aircraft provide visual activity in the environment but should not be interpreted as a complete simulation of real air traffic, ADS-B information, or regulatory airspace constraints.[/note]
Use Multiple Drones in Paraverse (Beta)
[note]Multi-drone Paraverse is a beta feature behind a feature flag. Contact a Skydio account manager to enable it for the organization.[/note]
Multi-drone Paraverse allows several simulated vehicles to operate in the same shared environment. Multiple pilots can fly separate vehicles at the same time while observing the same surroundings and activity.
Each vehicle can see the other simulated vehicles as they move through the environment. When dynamic objects are enabled, all participating vehicles also see the same cars, pedestrians, and other simulated traffic.
Example Workflows
Multi-drone Paraverse can be used to practice:
- Multi-drone coordination: Operate several vehicles over the same incident or area of responsibility
- Pilot handoffs: Practice transferring observation responsibilities between pilots or vehicles
- Operational deconfliction: Build awareness of other aircraft operating nearby and coordinate flight paths and altitudes
- Collaborative search: Divide a search area among several vehicles and share findings through Skydio Cloud
- Multi-drone Remote Flight Deck workflows: Experience how multiple vehicles are monitored and controlled from a shared Cloud environment
Create a Multi-drone Session
- Select Multiple drones when creating a Paraverse environment
- Choose the number of vehicles (up to six)
- Place their launch locations on the map
All vehicles in a multi-drone session must belong to the same site and use the same software version. Each vehicle has its own simulated dock and only displays its associated dock.
Related articles
Limitations
Features that are not fully representative:
- GPS: The simulator provides a strong (but not perfect) GPS signal. It does not simulate urban canyons.
- Attachments: Spotlight, NightSense, parachute, and RTK/GPS appear in Skydio Cloud as if they exist, but toggling them has no visual effect in the simulated world (for example, Spotlight does not show a light beam).
- Thermal: Thermal view is a grayscale image of the primary camera, not a heat simulation.
- Signal strength icons: Link-quality indicators may not reflect real RF conditions. Mid-flight connectivity events can be used to practice degraded or lost-link behavior. See How to Use Mid-Flight Events in Skydio Paraverse.
Features not yet supported:
- External radio: Not supported in the simulator.
- OTA updates: Simulators cannot be updated with an over-the-air update. The autonomy software may show that an update is available, but triggering it has no effect.
- Weather information or night flight: Conditions remain daytime and clear in Paraverse.
- Dock for X10 preflight drone inspection: The simulated dock does not support cameras, so preflight inspection and other dock-camera workflows are not currently possible.
Troubleshooting
- Location cannot be changed after creation. Once a Paraverse vehicle is created and placed on a map, its location cannot be moved. Relocating the dock in its site does not move the Paraverse vehicle and can block takeoff because of a mismatch between the original creation location and the new dock location in the site.
- Unrecoverable vehicle state. If a Paraverse drone enters an unrecoverable state (for example, after crashing into an obstacle with Obstacle Avoidance disabled), stop and restart the simulator.
- Long creation wait. Creation usually takes about five minutes; wait longer if resources are constrained, and use the status UI for progress.
- Flight blocked after site or dock changes. Recreate the Paraverse at the intended location rather than relocating an existing simulator.
Was this article helpful?