Skydio Enterprise Controller enables access to the advanced autonomy systems allowing operation of Skydio X2 with minimal cognitive effort. The controller needs to be paired with X2 pre-flight and can only be paired with one X2 at a time.

Quick Steps

To pair Skydio Enterprise Controller with X2:

Step 1 - Power on Skydio Enterprise Controller  
Step 2 - Power on your X2  
Step 3 - Connect the controller to your drone using the USB-C cable X2_to_controller_USB_C.png
Step 4 - Wait approximately 15 seconds  
Step 5 - A message will display alerting you to pair the controller connect_pair_to_X2.png

Step 6 - The drone name will be listed under DEVICES

paired_drone_select_X2.png

[info text="Pairing only needs to be completed one time."] 

To unpair Enterprise Controller:

Step 1 - Turn off your paired drone CS_C78_media_UI_unpair1.png
Step 2 - Navigate to the INFO tab and select your drone name under DEVICES  paired_drone_select_X2.png
Step 4 - Select Forget  CS_C78_media_UI_unpair3_anno.png
Step 5 - Select FORGET to confirm unpairing CS_C78_media_UI_unpair4.png

Explore More

How to activate your Skydio Enterprise Controller

How to charge your Skydio Enterprise Controller

 

 Skydio, Inc. A0014

Was this article helpful?