Routine preflight maintenance should include an inspection of the arm clamps as they may loosen over time. This process involves loosening and tightening the tension bolts using the torque driver included with your X2E.

- Tension Bolt Set Screw
- Tension Bolt
|

Torque Driver tool
|
Quick Steps
To loosen and tighten the tension bolts:
Step 1 - Release the arm clamp |
 |
Step 2 - Lift the motor arm out and away from the body
-
- until they are fully extended
|
 |
Step 3 - Return motor arm clamps to the locked position
-
- ensuring that the blue marks align
|
 |
Step 4 - Loosen the tension bolt set screw
|
 |
Step 5 - Tighten the tension bolt
-
- using the torque driver
- turn the driver clockwise until you hear a click
|
 |
Step 6 - Tighten the set screw
-
- using the torque driver
- turn the driver clockwise until you hear a click
|
 |
Step 7 - Repeat Steps 1-4 with remaining arm clamps |
|
Explore More
Explore related articles for additional information
How to replace propellers on your Skydio X2E
Skydio, Inc. A0004