If an update is available, Skydio batteries will automatically do so before your next flight.

Skydio will notify you if an update is available for the X2 Dual Charger. To perform an update, you will need:

  • Skydio X2 Dual Charger
  • An updated Skydio X2 vehicle
  • Two Skydio X2 batteries
  • USB-C cable

Updating the Dual Charger

Step 1 - Slide one battery onto the Dual Charger


Step 2 - Insert one battery onto a Skydio X2 


Step 3 - Power on your drone

  • Hold the power button for three seconds

Step 4 - Allow the drone to fully boot up


Step 5 - Connect the drone to your Dual Charger using the USB-C cable

  • The update will begin automatically
  • A single green light will display
  • The process can take up to 5 minutes
  • The lights on the battery attached to the charger will pulse blue for several seconds
  • The lights will turn off while the charger updates
  • The lights on the battery will turn green, indicating that the update is complete

Step 6 - Unplug the cable from the Dual Charger and drone

  • The Dual Charger is updated and ready for use

Explore More

Explore related articles for additional information

How to Charge and Maintain your Skydio X2 Batteries

Access Skydio X2 Operator Manual

Skydio, Inc. A0010

Was this article helpful?